Collection: Products

The 28/28 wheelset is the result of ProjectSpeed — No.6’s commitment to engineering faster systems through real-world testing and racing feedback. Designed with a focus on weight reduction and dynamic response, the 28mm profile delivers rapid acceleration and precise handling without compromise. Every gram, every layer of carbon, and every design decision is made to improve efficiency under load. Weight 1043gDepth 28mm front and rearWidth Ext 32mm front and rearWidth Int 24mm front and rear  UCI Approved

The 42/48 is engineered as the ultimate all-round race wheelset — where aerodynamic performance, weight, and control are brought into perfect balance. Developed through ProjectSpeed, every detail is refined to deliver speed across varied terrain and changing conditions. Weight 1145gDepth 42mm front 48mm rearWidth Ext 33mm front 31mm rearWidth Int 26mm front 24mm rear  UCI Approved

45/50 is the perfect all rounder, designed to make you go faster. Weighing in at an incredible weight of 1260g. Fat external width at the front for better crosswind control and comfort, stiff 3.8mm carbon spokes for faster acceleration and Enduro steel bearings for the ultimate riding experience. Weight 1260gDepth 45mm front 50mm rearWidth Ext 34.4mm front 31.5mm rearWidth Int 28mm front 24mm rear  UCI Approved

Comes standard with 2026 Zero Gravity V.3 Hubs. Compatible with pre-2026 models Zero Gravity V1 & 2 free hub.  Vapor coated for lower friction and tighter tolerances for instant engagement.

The 50/58 are made to go fast! Perfect weapon for the full send speed demon in you. With featherlight carbon construction, lower rolling resistance, and 5mm wide aero carbon spokes with t-head spoke ends, you will be sure of rapid power transfer for unmatched speed and response. These wheels come standard with Enduro steel bearings. Weight 1280gDepth 50mm front 58mm rearWidth Ext 31.5mm front 31.5mm rearWidth Int 24mm front 24mm rear  UCI Approved

The 52/58 is built for pure speed at race pace. Developed through ProjectSpeed, this wheelset is engineered to reduce drag, maintain momentum, and deliver maximum efficiency when speeds are high and effort is sustained. The progressive 52mm front and 58mm rear profiles optimise aerodynamic performance while maintaining stability and control in real-world conditions. At speed, the 52/58 holds momentum effortlessly — translating power into forward motion with minimal loss. Weight 1267gDepth 52mm front 58mm rearWidth Ext 32mm front 30mm rearWidth Int 25mm front 24mm rear  UCI Approved

The 58/65 is built for riders who prioritise pure aerodynamic efficiency. Developed through ProjectSpeed, this wheelset is designed to reduce drag to a minimum and maintain speed at the highest intensities. With a deep 58mm front and 65mm rear profile, the system is optimised for sustained velocity — holding speed effortlessly on fast courses, in breakaways, and under race pressure. Despite its depth, stability remains predictable and controlled, giving riders the confidence to push harder for longer. Weight 1349gDepth 58mm front 65mm rearWidth Ext 31mm front 31mm rearWidth Int 24mm front 24mm rear  UCI Approved

The A3RO Tri-spoke is ideal for TT's and Triathlons where the conditions and the course need that little extra consideration. It's also perfect if you just want your bike to stand out. With a 76mm profile and engineered to our ProjectSpeed philosophy, the A3RO will get you flying along the road at top speed. Weight 907g front and 1025g rearDepth 76mm front and rearWidth Ext 32mm front and rearWidth Int 25mm front and rear   

Specification: Extra long driver for nipple adjustment of deep section wheels. Ergonomic T-handle for better grip. Spec: length 110 mm with 5.5 mm hex socket.

Spare carbon spokes set includes a total of 4 spokes for each model. 2 for front wheel and 2 for rear wheel. Made with carbon and lightweight aluminum. 2026 models 28|28 comes standard with 3.8mm wide carbon spokes 42|48 comes standard with 3.8mm wide carbon spokes 52|58 comes standard with 3.8 & 5.0mm wide aero carbon spokes 58|65 comes standard with 3.8 & 5.0mm wide aero carbon spokes G45R/W comes standard with 3.8 & 5.0mm wide aero spokes 2025 models 30|30 comes standard with 3.8mm wide carbon spokes 45|50 comes standard with 3.8mm wide carbon spokes 50|58 comes standard with 5.0mm wide aero carbon spokes G45 comes standard with 5.0mm wide aero spokes

The G45R is engineered for high-speed gravel racing. Developed through ProjectSpeed, it prioritises low weight, rapid acceleration, and precise handling to deliver performance when the pace is high and the margins are small. Optimised for race conditions, the G45R responds instantly to power input, maintaining momentum across fast gravel sectors, rolling terrain, and competitive efforts. It’s designed for riders who push the pace and demand equipment that keeps up. Weight 1195gDepth 45mm Width Ext 34.5mm front 33mm rearWidth Int 28mm front 26mm rear  UCI Approved

The G45W is engineered for demanding All-terrain gravel conditions where control, stability, and confidence define performance. Developed through ProjectSpeed, it is optimised for wider tyres, improved support, and enhanced handling across rough terrain. Designed to maintain speed where surfaces are unpredictable, the G45W delivers a smooth, controlled ride — allowing riders to push further with greater confidence and less fatigue. Weight 1230gDepth 45mm Width Ext 38mm front 38mm rearWidth Int 32mm front 32mm rear  UCI Approved

Lightweight replacement tubeless valve made from 7075 aluminum alloy. 4 way airhole for increase airflow and reduce sealant blockage.

The clean, sharp, and unmistakable decal - for riders who refuse to blend into the bunch, seeking the ultimate disruption.

To celebrate the launch of ProjectSpeed, we've created a t-shirt. Available in black or white, you can look as great off the bike as you do on it. 100% cotton Standard fit

The final evolution of rotation, this set of ProjectSpeed Tripeak Ceramic Bearings Upgrade Kit is precision engineered for maximum efficiency, unmatched smoothness, and uncompromising performance. Hub Bearing Sizes: Front 6803*2Rear 6802*2, 15267*2

The Pulsar represents the most advanced expression of ProjectSpeed — a full disc wheel engineered for maximum aerodynamic efficiency and uncompromised speed. Designed for time trial and triathlon performance, Pulsar eliminates drag, stabilises airflow, and maintains momentum at the highest velocities. Every element is refined to deliver efficiency under sustained effort, where marginal gains define results. Weight 890g – 910gWidth Ext 30mmWidth Int 25mm UCI approved

6 x RideNow TPU 36g inner tubes bundle, available in 45mm, 65mm, 85mm valve length.

All 2026 models come standard with Tripeak Ceramic Bearings.